2.1.18

Bitcoin, la miniera d’oro delle criptovalute nel deserto industriale bulgaro


ilfattoquotidiano.it
Bitcoin, la miniera d'oro delle criptovalute nel deserto industriale bulgaro
Virginia Della Sala
9-11 minutes

Dove c'erano le industrie oggi si "fabbricano" criptovalute: scaffali pieni di computer e "minatori" davanti agli schermi. Si producono qui, vicino Sofia, perché l'energia costa un terzo

C'è la neve a Kremikovtzi, in Bulgaria, a trenta minuti di auto dalla capitale Sofia: è la prima nevicata di dicembre e le temperature sfiorano lo zero. Ricopre le decine di vecchi autobus abbandonati in ogni angolo che fino agli anni Novanta trasportavano gli operai nelle fabbriche in cui si lavorava il ferro. Almeno 20mila lavoratori che, durante il comunismo, venivano prelevati dalla periferia della città dove erano stati messi a vivere e condotti in quest'area industriale. Oggi è tutto abbandonato: si vedono le sagome delle ciminiere e delle fabbriche nella nebbia. Le insegne con le scritte in cirillico sono sbiadite, i taxi arrivano a fatica e grossi cani da guardia si aggirano in quest'area spettrale. Un tempo qui si produceva e si facevano soldi, poi quello che gli abitanti chiamano "il sistema capitalistico" ha reso antieconomico lavorare il ferro. "In Bulgaria non ce n'è – spiegano – e importarlo costava troppo". Le fabbriche hanno chiuso una dopo l'altra, non è rimasto nulla se non un silenzio inquietante. Eppure, tra questi scheletri industriali, si producono soldi, moneta. Meglio: criptomoneta. Inaspettatamente c'è una miniera d'oro nascosta, ci sono le "fabbriche di bitcoin" europee, quei luoghi dove nasce la moneta virtuale di cui tutti parlano da mesi e di cui tutti si chiedono la provenienza. Chi c'è dietro? Come nasce? Esiste davvero una "fabbrica di bitcoin"? Sì, esiste. Anzi, esistono.

Così si fanno soldi nella fabbrica abbandonata

Incontriamo Gianluca Mazza e Alekos Filini in una stradina di Sofia. Sono ospiti di una loro socia bulgara. Per chiamare il taxi bisogna usare a un app sullo smartphone. "I tassisti non parlano molto inglese – spiega Gianluca – e il posto dove dobbiamo andare non è facile da spiegare". Man mano che ci si allontana dalla città, il paesaggio cambia. I palazzoni della periferia, i campi innevati, le baracche, le ferrovie arrugginite con i vagoni altrettanto arrugginiti. Quando appaiono le sagome dei primi capannoni industriali è chiaro che siamo in una zona abbandonata. Le scritte e le indicazioni sono sbiadite, non c'è un'anima, incrociamo una sola auto. Ci fermiamo nel piazzale di una struttura azzurrina. Azzurra la facciata, il pannello su cui c'era la vecchia denominazione, azzurra la guardiola dove c'è una guardiana a cui fanno compagnia due grossi cani che un po' abbaiano e un po' chiedono di essere accarezzati. All'ultimo piano, c'è la "0301", la farm – fabbrica – di questi due italiani che producono criptovalute in Bulgaria. Fa freddo fuori, freddo dentro la struttura. Saliamo al quarto piano: i muri sono scrostati, le stanze fatiscenti ma in fase di ristrutturazione. Al piano della fabbrica si accede attraverso un cancello verde: un passo e ci si ritrova in una galleria del rumore. C'è un ronzio fortissimo e costante che aumenta d'intensità a ogni passo. "Sono le ventole", spiegano. Un sofisticato sistema di aerazione mantiene bassa la temperatura. Ce n'è bisogno, nonostante il freddo glaciale di Sofia. Quando Alekos prova a spegnerle, l'ambiente si surriscalda in pochi minuti. "È colpa delle macchine – spiega – il loro lavorio produce calore". Aprire le finestre non basta, le ventole vengono riaccese dopo poco: le macchine devono stare al fresco altrimenti rischiano di bloccarsi e rompersi.

Gli scaffali che accumulano premi

Siamo nella fabbrica di criptomonete: file di scaffali su cui sono incastrate centinaia di schede video che lavorano notte e giorno per "minare", ovvero per produrre bitcoin e altcoin (criptomonete alternative al bitcoin). Si tratta di componenti utilizzate per i videogiochi: la complessità del lavoro richiede infatti alte prestazioni. Ogni "macchina" è composta da sei schede video e ognuna fa eseguire un programma informatico che lavora per ottenere 'un premio'. "Le macchine – prova a spiegarci Gianluca – fanno girare un algoritmo. Il loro lavoro, e la corrente che consumano, viene ripagato in criptovalute che finiscono sul nostro portafogli virtuale". Sono loro poi a inserirle nel circuito, vendendole. Alekos e Gianluca al momento minano soprattutto criptomonete alternative, dagli Ethereum a Zcash, poi le convertono in bitcoin.

Come si aggira la Cina monopolista

Il monopolio delle macchine per produrre direttamente bitcoin è infatti cinese e appartiene all'azienda Bitmain. "Periodicamente – spiega Gianluca – mette in vendita un migliaio di macchine in stock online e c'è la corsa ad acquistarle visto che per mesi non ne vendono più". Così in Bulgaria c'è chi le compra a 5mila leva (la moneta bulgara che vale più o meno 50 centesimi di euro) e le rivende al doppio del prezzo. Per aggirare il problema e le truffe, i minatori di criptomonete ricorrono alle schede video. Costano circa 600 euro l'una e il prezzo aumenta al crescere della loro potenza. Nella farm 0301 c'è un investimento di 600mila euro (proveniente da 13 investitori italiani e non). "A gennaio – spiega Gianluca – le macchine raddoppieranno e il rientro del capitale è previsto entro un anno". In tre mesi si sono però già ripagati il costo di quasi metà delle macchine.

Il business delle farm e dell'energia low cost

Ivan Kamburov è invece bulgaro. È il titolare di un'azienda che si chiama Mint ed è il fornitore dell'infrastruttura. "Guarda – ci dice mostrandoci una foto sul suo smartphone – ci crederesti che si tratta di una fabbrica?". È l'immagine di una struttura abbandonata e fatiscente: semidistrutta, pezzi di legno ovunque e vetri frantumati, immondizia e residui industriali. "Questa sarà la prossima factory!" esclama entusiasta. È lui che ha fornito a Gianluca e ad Alekos il posto dove montare le macchine. "Sono un landlord", dice. Un proprietario terriero. In Bulgaria minare bitcoin è un affare: l'elettricità costa un terzo che in Italia o in quella che viene definita "western Europe", Europa dell'ovest. "La cosa più difficile da reperire in questo business – spiega in inglese – è l'elettricità. Perciò siamo in questa parte della città: solo due stanze consumano come una fabbrica medio-grande, una di queste macchine come una casa con un termosifone durante l'inverno. Cinque macchine consumano come una normale famiglia". In una sola delle sale si consumano 300 kw di energia elettrica l'ora: la zona industriale garantisce un approvvigionamento stabile. A Ivan viene pagato l'affitto della fabbrica. "Costruiamo l'infrastruttura, troviamo queste strutture e le ristrutturiamo. Costruiamo l'impianto di ventilazione e rinnoviamo la rete elettrica. Ci definiamo una data center company". Ivan e i suoi soci, però, hanno anche altre attività. Come la nascente 'Amanda' (con la collaborazione tra il team italiano di 0301 e quello bulgaro di Mint). "È per chi vuole partecipare al mining delle criptovalute solo con investimenti. Noi compriamo le macchine, le mettiamo a lavorare e a fine anno ci sono i dividendi". Dice di aver sempre lavorato nell'information technology (It): ha assemblato le prime macchine per i bitcoin nel suo garage circa cinque anni fa. Poi si è lanciato nel business dell'infrastruttura. Ha capito che la nazione in cui vive ha un vantaggio competitivo che le permetterà di diventare leader europeo in questo campo. Si risparmia sia sull'elettricità che sulla manodopera, c'è il 10 per cento di tassazione e la vita costa la metà. "In questi ultimi mesi, poi, c'è stato un boom, molti si avvicinano ai bitcoin per speculare. È un periodo redditizio per noi e non importa se in due anni tutto questo sarà obsoleto: avremo ormai creato una rete di contatti e competenze in tutta Europa che sarà una base per lo sviluppo di nuove tecnologie e di nuovi impieghi, a partire dalla blockchain (la tecnologia su cui si basano i bitcoin, ndr).

Una terra inesplorata e ancora non conquistata dai monopolisti del web. "Forse passeranno i Bitcoin, ma rimarrà la tecnologia e noi vogliamo esserci". L'investimento di Mint è stato di 100mila euro, in 15 mesi sono cresciuti di quattro volte. Per il loro sito (attraverso il quale è possibile 'affittare' macchine per minare) hanno oltre cento dispositivi: è un business diverso da quello di Gianluca e Alekos che, invece, hanno un approccio sul lungo periodo e mirano ad accumulare criptomonete da immettere nel mercato nel momento più favorevole. "Ci sono ovviamente centinaia di farm in Cina – spiega Ivan – ed è difficile per gli europei operare lì: non solo producono l'occorrente, ma hanno lì anche tutte le loro farm. Rischiano di controllare tutto. Noi siamo l'alternativa europea". Insieme all'Islanda, dove l'elettricità economica "ma il costo del lavoro è molto alto – conclude Ivan-. E poi… c'è il rischio che esploda un vulcano!". Ride e ci saluta. "Devo andare, mi tocca cercare altre fabbriche dismesse".

© 2009-2018 RIPRODUZIONE RISERVATA - Il Fatto Quotidiano - Ti preghiamo di usare i bottoni di condivisione, e di non condividere questo articolo via mail o postarlo su internet, il giornalismo indipendente ha un costo, che può essere sostenuto grazie alla collaborazione dei nostri lettori.

Visita e Tour Virtuale a 360° di Milano

1.1.18

Grani moderni e l'origine della celiachia » Il Cibo della SaluteIl Cibo della Salute


ilcibodellasalute.com
Grani moderni e l'origine della celiachia » Il Cibo della SaluteIl Cibo della Salute
by Silvia Petruzzelli
7-9 minutes

La celiachia, risposta immunitaria dell'organismo, è un disturbo dell'alimentazione, in rapida crescita: la sua incidenza negli ultimi 50 anni è aumentata drasticamente. Ciò è da attribuire ad un miglioramento dei metodi di diagnosi oppure ad un cambiamento (avvenuto appunto negli ultimi 50 anni!) del nostro stile di vita e alimentare? celiachia

Come è cambiata la nostra alimentazione? Diversamente da ciò che avveniva 50 anni fa, oggi la nostra alimentazione si basa su cibi iper-processati, raffinati industrialmente. Non mangiamo più "i frutti della terra", ma le trasformazioni di laboratorio, ovvero ciò che ci viene proposto dall'industria alimentare, illudendoci che sia naturale (si veda l'esempio classico dei cosiddetti aromi "naturali", che di naturale non hanno nulla!).

La crescita del consumo di zucchero nell'ultimo secolo è pressoché raddoppiato. Il pane è prevalentemente quello bianco, fatto con farine ultra-raffinate (la farina 00, o, peggio, la Manitoba), spesso "rinforzate", addizionate di glutine, ma anche di zucchero (ingrediente che troviamo, spesso sotto mentite spoglie, in gran parte dei prodotti industriali).
Se acquistiamo prodotti confezionati e proviamo a leggere gli ingredienti (cosa che dovremmo fare sempre più, fino a divenire una prassi!), ci rendiamo conto che spesso hanno nomi incomprensibili: questo dovrebbe insinuarci il sospetto di quanto poco ci sia di naturale in quello che mangiamo.

Tutto questo cibo "finto" ha contribuito, negli anni, a toglierci nutrimento, a indebolirci. Inoltre, le modifiche apportate dall'uomo in agricoltura, hanno peggiorato la situazione. In particolare, per quanto riguarda i grani, il livello di glutine presente nelle nostre farine è stato modificato.

Suddette modifiche hanno originato un glutine molto concentrato e molto resistente, che arriva indigerito fino al colon, diventando tossico.

Secondo il professor Stefano Benedettelli, dell'Università di Firenze, adottare varietà antiche di grani significa riequilibrare una nutrizione umana ormai subissata da processi industriali nella maggior parte degli alimenti ingeriti.

Queste varietà antiche, tra l'altro, hanno un contenuto decisamente meno concentrato di glutine.

E il pane? Possiamo prepararlo come vuole la tradizione…valorizzando i nostri grani antichi, ovvero quei grani che non hanno subito interventi di selezione da parte dell'uomo (per l'industria) e che sono rimasti "originali": così come madre natura li ha creati.

Da tempo si ipotizza una correlazione tra le modificazioni genetiche (finalizzate esclusivamente a esigenze di produttività) a cui sono stati sottoposti i grani moderni (come, ad esempio, il grano duro Creso, mutante del Cappelli, ottenuto nel 1974 sottoponendo quest'ultimo a bombardamento con raggi gamma, uno dei grani maggiormente utilizzati nelle coltivazioni italiane; o varietà mutanti del grano tenero, irradiate con i raggi gamma) e l'aumento delle tante difficoltà digestive dovute al consumo di frumento, e della celiachia (la cui incidenza è cresciuta notevolmente negli ultimi anni). E' di tale avviso il professor Luciano Pecchiai, già Primario Patologo Emerito dell'Ospedale dei Bambini "Vittore Buzzi" di Milano, esperto di Alimentazione.

«E' ben noto che il frumento del passato era ad alto fusto – spiega Pecchiai – cosicché facilmente allettava, cioè si piegava verso terra all'azione del vento e della pioggia. Per ovviare a questo inconveniente, in questi ultimi decenni il frumento è stato quindi per così dire "nanizzato" attraverso una modificazione genetica».

Pare che la modifica genetica del frumento sia correlata a una modificazione del glutine, in particolare della gliadina, una sua frazione, e ciò abbia reso il glutine meno riconoscibile per l'organismo. La celiachia è causata da una reazione alla gliadina. E l'incidenza della celiachia è aumentata in maniera esponenziale negli ultimi anni.

E' possibile consultare le varietà mutanti su http://mvgs.iaea.org/Search.aspx, il data base FAO/IAEA.

Secondo il Dott. Pier Luigi Rossi, medico specialista in scienza dell'alimentazione «Un eccesso di glutine, ripetuto nel tempo, provoca una aggressione ai villi intestinali, che sono le porte attraverso le quali le molecole nutrienti introdotte con la alimentazione entrano o non entrano nel nostro sangue. Il glutine altera in profondità i villi e i microvilli, gli enterociti della mucosa dell'intestino tenue (che nel morbo celiaco sono atrofizzati). Con il tempo e con dosi elevate giornaliere di glutine una persona può sviluppare la celiachia con anticorpi positivi al morbo celiaco oppure può andare incontro alla sindrome Gluten Sensitivity, con gli stessi sintomi della celiachia senza gli anticorpi specifici positivi».

Anche la canadese Manitoba è ricca di glutine. «La Farina Manitoba viene utilizzata anche come base per la preparazione del Seitan, alimento che viene anche definito come "Carne Vegan". Consiglio alle persone che consumano seitan di riflettere su questa loro scelta alimentare. Il seitan è un concentrato di glutine. La pizza e molti pani "speciali" sono concentrati di glutine», continua Rossi.

Il glutine (il cui nome deriva dalla parola latina "gluten" colla) è un collante, utile in panificazione per favorire la lievitazione. Potrebbe, però, disturbare la funzionalità del nostro organismo, in particolare quello dei grani moderni o delle farine raffinate.

Acquistando farine di grani antichi direttamente dai nostri produttori: si può risparmiare e assicurarsi maggiore qualità. Oltretutto, nel caso delle farine, possiamo sapere quando queste sono state macinate (subito prima dell'acquisto); diversamente da quelle acquistate sui banchi del supermercato.

E chi avesse la possibilità di avere un piccolo mulino (casalingo), potrà acquistare direttamente i grani e macinarli, avendo così la possibilità di avere sempre farine (integrali o semi-integrali qualora si utilizzi un setaccio) fresche.
Silvia Petruzzelli

Dopo una pluriennale esperienza in aziende multinazionali, decido di cambiare vita per ri-trovare me stessa. Lascio la carriera per tornare alla natura, ad una vita semplice. Intraprendo quindi gli studi di Naturopatia. Affascinata dalla Medicina Tradizionale Cinese, proseguo con il percorso di Shiatsu, approfondendo successivamente i principi energetici del cibo attraverso lo studio e la pratica dell'Alimentazione Naturale Macrobiotica, in Italia e all'estero. Per migliorare le tecniche di cucina, seguo i corsi di Alta Cucina Naturale presso il Joia Academy, fondata dal maestro Pietro Leemann. Collaboro attivamente con La Grande Via, l'associazione fondata dal Dottor Franco Berrino. Ho fondato questo blog IlCibodellaSalute.com allo scopo di divulgare uno stile di vita sano, consapevole e sostenibile. Cuoca e Docente di Alimentare Naturale Macrobiotica e MTC presso l'Associazione Chicco di Riso, gestisco il B&B Il Melograno Nano, a Barga (LU). Conduco corsi teorici e pratici su tutto il territorio nazionale (e anche all'estero). Il mio sogno? Poterci avviare verso una Consapevolezza, ovvero la via per ritrovare noi stessi, per vivere in armonia con la natura, imparando ad essere artefici della nostra vita e del nostro destino. Per essere in salute, liberi, felici. Questo il fine: far si che il messaggio diventi virale. Per un mondo migliore!

31.12.17

Ricordatevi l'Italia prima del'68 - Ritagli - Blog


vecchio.blogautore.repubblica.it
Ricordatevi l'Italia prima del'68 - Ritagli - Blog
Repubblica.it
3-4 minutes

Nel 2018 saranno 50 anni dal Sessantotto, prepariamoci a un'alluvione di rievocazioni. Saranno perlopiù critiche. Il tiro al piccione è già iniziato, come dimostra oggi un paginone sul Messaggero, a firma dello storico Marco Gervasoni. Non c'è da stupirsi: da tempo la contestazione giovanile è oggetto di un pesante revisionismo, politicamente orientato, frutto di questo tempo senza memoria. Sia chiaro: il '68 non è affatto un feticcio, ma va, se possibile, studiato e analizzato freddamente, senza pregiudizi, con le sue luci, le sue zone d'ombra e i suoi ridicoli settarismi, (l'Espresso in edicola ripubblica meritoriamente la famosa poesia di Pasolini dopo Valle Giulia), a cominciare dalla cruciale domanda: "Il terrorismo italiano è un frutto avvelenato di quella stagione?" Risposta: "Sì".

Ma diciamolo forte: il '68 è soprattutto una rivolta di costume, che innesca una processo di modernizzazione senza precedenti. E' un pezzo della nostra identità collettiva, come Caporetto, padre Pio, il Mundial spagnolo, la Dc e il Pci, Berlusconi. C'è un'Italia prima e una dopo, perché quello fu "un rasoio che superò il passato dal futuro", nella definizione di Time. E' doveroso quindi parlarne laicamente, ma tenendo ben presente cos'era quella società alla fine degli anni Sessanta. Siete pronti? Non c'era il divorzio. La pillola era vietata. L'aborto clandestino era praticato ogni anno da un milione di donne italiane. Tradire il marito era reato, ma non viceversa (purché l'uomo non portasse l'amante a casa). Ben 81 italiani su 100 rimpiangevano i bordelli, una ricerca europea definì gli italiani come il popolo più retrogrado d'Europa infatti di sesso. La condizione operaia, prima dell'autunno caldo, era spesso spaventosa. Ad Avola, in Sicilia, la polizia uccise due braccianti in sciopero. Si chiamavano Giuseppe Scibilia, 47 anni e Angelo Sigona, 25. A scuola i prof schiaffeggiavano gli studenti. L'università, tutta Croce e Gentile, era accessibile solo a chi proveniva dai licei. Maurizio Magnabosco, studente di Sociologia a Trento, poi capo del personale alla Fiat, un giorno mi raccontò che agli esami un vecchio barone gli chiese: "Lei sa dirmi di che colore erano le calze del vescovo Raterio di Verona?". Infine, tra le tante, avete presente in che stato versavano gli ospedali psichiatrici prima che Franco Basaglia pubblicasse "L'istituzione negata", un'inchiesta che vendette 60mila copie e che portò alla legge 180 dieci anni dopo? Bene, adesso criticatelo pure il '68, ma ricordatevi cos'era quel mondo lì. Vi stava bene?

Scritto in Senza categoria | 4 Commenti »

Musica & Memoria

25.12.17

La Via Francigena in bicicletta da Fidenza a Roma


bikeitalia.it
La Via Francigena in bicicletta da Fidenza a Roma
Alberica Di Carpegna
12-15 minutes

Emilia Romagna, Italia, Itinerari, Lazio, Toscana • di

Un'antica via di pellegrinaggio lunga 1.800 chilometri che collega Canterbury a Roma, sepolcro degli apostoli Pietro e Paolo e punto di riferimento per la cristianità.
via francigena in bicicletta
Origini storiche della Via Francigena

La Francigena è un'antica via di pellegrinaggio lunga 1800 chilometri che collega Canterbury a Roma, sepolcro degli apostoli Pietro e Paolo e punto di riferimento per la cristianità. In età medievale era percorsa non solo dai pellegrini ma anche da commercianti ed eserciti. A causa di guerre e calamità naturali che dilagavano sul territorio non è pervenuto un percorso univoco della via Francigena, ma esistono molte varianti.

La più antica e testimonianza storica sull'esistenza di questa via è quella di Sigerico, arcivescovo di Canterbury, che ha percorso la Francigena nel 990 d.C. per ricevere dal papa Giovanni XV il mantello vescovile. Il tracciato suddiviso in 79 tappe da Sigerico, nel suo diario, è stato adottato dal Consiglio d'Europa come itinerario ufficiale del Cammino per Roma. Il documento è costudito ancora oggi presso la British Library di Londra.
Tratto italiano

La Francigena nasce come via di pellegrinaggio pedonale, si snoda per sentieri sterrati e stradine secondarie ma può essere percorsa anche in bicicletta avendo la premura d'informarsi sulle condizioni delle strade. Prima d'intraprendere il viaggio è utile dotarsi della guida La via Francigena in bicicletta, edita da Terre di mezzo.
Libri sulla Via Francigena

francigena-libro guida-via-francigena-in-bicicletta guida-via-francigena cartografia-via-francigena via-francigena-del-sud

La giuda suddivide il tratto italiano in 23 tappe di circa 40 km indicando per ognuna le varianti in base alla tipologia di percorso e al proprio allenamento; si è rivelata molto utile anche per trovare punti di assistenza per alcune riparazioni alle bici. Tuttavia è opportuno avere anche una mappa maggiormente dettagliata in scala almeno 1:250.000.
Differenze con il Cammino di Santiago

segnaletica-via-francigenaLa segnaletica è spesso carente e contraddittoria nel tratto francese e praticamente inesistente per le varianti destinate al percorso in bici. Spesso chiedendo informazioni si ha avuto la sensazione che la via Francigena sia poco conosciuta dalle persone locali che non sono in grado di dare indicazioni ai pellegrini.
E' più difficile trovare alloggio per la notte.
I pellegrini sulla Francigena sono ancora pochi, non ne incontrerete molto spesso.
Credenziali del pellegrino

La credenziale del pellegrino è un attestato personale a testimonianza del pellegrinaggio compilato e timbrato dalle parrocchie, municipi e ospitali, che danno diritto a pernottare con tariffe agevolate nelle strutture convenzionate.
Ricevere la credenziale del pellegrino è semplice: basta visitare questo link e compilare i moduli.

credenziali-pellegrino-francigena
Dove dormire lungo la Via Francigena

Per i pellegrini lungo la via si trovano diverse sistemazioni per la notte: ospitali gestiti da congregazioni religiose, monasteri, ostelli e hotel. Molte strutture aprono solo in estate lasciando la via in alcuni tratti sguarnita di accoglienza nel resto dell'anno. La situazione sta migliorando grazie al lavoro dell'Associazione vie Francigene, che negli ultimi mesi ha raccolto tutti i dati delle ospitalità in un documento online con i numeri di telefono di strutture, molto spesso religiose che mettono a disposizione per pochi euro un letto e una doccia per i pellegrini: in alcune vengono offerti anche la cena e la colazione.
Testimonium pellegrinaggio

I pellegrini che percorrono almeno gli ultimi 100 Km della via Francigena a piedi o in bicicletta possono ricevere, presentando la credenziale con i vari timbri, il Testimonium, un documento firmato dall'arcivescovo a testimonianza dell'avvenuto pellegrinaggio. Per ottenerlo bisogna entrare in San Pietro e chiedere di Don Vercesi, incaricato al censimento e ad accogliere i pellegrini a Roma. E' prevista anche una visita guidata della cripta e della tomba di San Pietro.
Mappa Via Francigena in bicicletta – Il nostro viaggio

Mappa kml mappa-kml-francigena | Applicazione iPhone app-francigena
Le tappe

Tappa 1: Fidenza – Medesano – Fornovo Taro 35 km
Percorso semplice di avvicinamento. Pernottamento nella frazione di Fornovo Taro a Riccò presso il monastero delle suore che per 15 E offrono camera, cena e prima colazione ai pellegrini.

Tappa 2: Fornovo Taro – Ghiare – Berceto (850m) 37 km
Percorso con saliscendi lungo il Taro fino a Ghiare da cui si imbocca a sinistra una strada in netta salita che dopo 13 Km di tornanti conduce a Berceto. A 4 km dall'arrivo c'è la possibilità di rifornirsi d'acqua e cibo presso un bar/ristorante. Incontro con la mia compagna di viaggio Stefania. Pernottamento nella casa del parroco con libero accesso alla cucina. Offerta libera.

Tappa 3: Berceto – Passo della Cisa (1020 m) -Pontremoli – Sarzana 76 km
Dolce salita fino al Passo (1020 m), poi ripida discesa verso il mare. Visita a Pontremoli e incontro ad Aulla con Perla e Gioia, due volontarie che ci accolgono nella chiesa di San Caprasio, secondo la tradizione il protettore dei pellegrini diretti a Roma. Proseguiamo in leggero saliscendi fino a Sarzana dove pernottiamo nella chiesa di San Francesco (10 E).

Tappa 4: Sarzana – Luni – Massa e Pietrasanta – Camaiore – Lucca 77 km
Sotto un cielo plumbeo seguiamo la strada in discesa fino a Luni per vedere i resti romani, proseguendo poi verso il mare. Imbocchiamo la strada per Camaiore/Lucca ma la guida fa prendere una deviazione per Monteggiori con pendenze da scalatori. Da Camaiore si segue la statale che con una salita verso Montemagno sulla cui cima sorride la statua di Gaber. Seguiamo le indicazioni per Lucca e tra saliscendi entriamo in città. Pernottamento nell'ostello in pieno centro storico per 19 E in camerata. Cena presso la tipica Osteria Miranda a 200 m dall'ostello.
Dove dormire lungo la Via Francigena (10% di sconto)

quadrifoglio
pieve-salti
es
ar

Tappa 5: Lucca – Altopascio – San Miniato – Castel Fiorentino – Gambassi Terme 67 km
Usciamo da Lucca su una strada pianeggiante per Capannori e Altopascio da cui si imbocca una strada sterrata che conduce sull'antica via romana lastricata fino a Galeno. Proseguire per Ponte a Cappiano e Fucecchio, un viale alberato conduce fino alla strada in salita per San Miniato. La strada scende dolcemente in pianura lungo campi di girasole fino a Castel Fiorentino. Proseguire in direzione "Casa Nuove" e dopo una ripida ma breve salita si arriva a una Pieve romanica dove sul retro si trova un nuovo ostello a 2 km da Gambassi Terme.

Tappa 6: Gambassi Terme – Val d'Elsa – Siena
Dall'ostello salire fino a Gambassi Terme e si inizia a pedalare nelle colline del Chianti, continui saliscendi ci conducono prima a San Giminiano poi, seguendo le indicazioni della guida, lungo tratti di sterrato di incredibile bellezza a Colle Val D'Elsa. Si imbocca la cassia che conduce a Monteriggiori, con il suo tipico castello medievale. Proseguiamo fino a Siena dove pernottiamo dalle suore dietro piazza del Campo allestita per il Palio e ceniamo per pochi euro all'Orto di Pecci, il locale di un giardino botanico in cui si coltiva ancora seguendo la tradizione medievale.

Tappa 7: Siena-Torrenieri – San Quirico D'Orcia – Bagno Vignoni – Radicofani
Usciti si scorgono le crete senesi e la strada prima in discesa continua per un lungo tratto in pianura fino alla salita verso Torrenieri e dopo 10 km a San Quirico d'Orcia. Proseguire lungo la variante sterrata fino a Bagno Vignoni ed ammirare la vasca di acqua termale nella piazza principale. Si continua sulla Cassia passando Gallina e Radicofani lungo una strada che sale a 830 m dove è arroccata la torre di Radicofani da cui si vedono la val d'Orcia e la valle del Paglia. Pernottamento nella congregazione di San Giacomo con rito della lavanda dei piedi. Cena e pernottamento a offerta libera.

Tappa 8: Radicofani – Acquapendente – Bolsena
Si attraversa il percorso sterrato della vecchia Cassia facendo attenzione in alcuni punti in discesa. A 4 Km da Acquapendente ci si immette sulla nuova Cassia. Dopo un ponte si segue sulla destra una stradina segnalata dal cartello della Via Francigna. Proseguendo si prende uno sterrato sulla destra che passa attraverso campi e fattorie. A San Lorenzo inizia una lunga discesa fino al lago di Bolsena. Pernottamento dalle suore in piazza del Duomo a Bolsena. Pernottamento e colazione 10 E.

Tappa 9: Bolsena – Montefiascone – Viterbo – Capranica
Seguire la Cassia lungo il lago superando il cimitero dei caduti di guerra del Commonwealth, prendere una deviazione sulla sinistra che conduce alla vecchia Cassia. Si scende per le terme di Bagnaccio e si prosegue fino a Viterbo. Si prosegue sulla strada del Signorino scavata nel tufo dagli etruschi. La sterrata continua per 18 km tra i noccioleti fino a Vetralla per poi entrare nel querceto della valle Contrafossi che porta a Capranica, dove abbiamo pernottato.

Tappa 10: Capranica – Sutri – Monterosi – La Storta
Si riprende la Cassia e si scende per 5 km fino a Sutri, paesino medievale con il suo centro storico arroccato su uno sperone di tufo. Deviare dalla Cassia fino a Trevignano sulle sponde del lago di Bracciano per poi continuare a salire fino a Campagnano e dopo poco a scendere verso Formello.

via-francigena-in-bicicletta Si continua fino a prima all'Olgiata e poi alla Storta. Pernottamento presso le suore per 10 E. Mancano 17 km a Roma.

Tappa 11: La Storta – Monte Mario – San Pietro Roma 17 km
Si procede lungo via della Trionfale seguendo le indicazioni per il centro, fino a salire per raggiungere il belvedere di Monte Mario che sovrasta tutta Roma. La vista della città è mozzafiato per tutti e ancor più per i pellegrini che hanno macinato chilometri lungo la Francigena. Si scende ripidamente fino a imboccare il colonnato del Bernini che immette in San Pietro, meta finale del nostro viaggio.
Foto Via Francigena in Bicicletta

francigena
via-francigena
francigena-sterrati
segnaletica-francigena
francigena-roma


di Cicloslavisti
Le migliori destinazioni per cicloturismo

    Prezzo: EUR 12,75

    Da: EUR 15,00

    Prezzo: EUR 12,33

    Da: EUR 14,50

    Prezzo: EUR 13,60

    Da: EUR 16,00

    Prezzo: EUR 13,60

    Da: EUR 16,00

    Prezzo: EUR 13,60

    Da: EUR 16,00

    Prezzo: EUR 12,75

    Da: EUR 15,00

‹ ›

26.11.17

Saturated fat does not clog the arteries: coronary heart disease is a chronic inflammatory condition, the risk of which can be effectively reduced from healthy lifestyle interventions | British Journal of Sports Medicine

Saturated fat does not clog the arteries: coronary heart disease is a chronic inflammatory condition, the risk of which can be effectively reduced from healthy lifestyle interventions | British Journal of Sports Medicine

Statistics from Altmetric.com

Coronary artery disease pathogenesis and treatment urgently requires a paradigm shift. Despite popular belief among doctors and the public, the conceptual model of dietary saturated fat clogging a pipe is just plain wrong. A landmark systematic review and meta-analysis of observational studies showed no association between saturated fat consumption and (1) all-cause mortality, (2) coronary heart disease (CHD), (3) CHD mortality, (4) ischaemic stroke or (5) type 2 diabetes in healthy adults.1 Similarly in the secondary prevention of CHD there is no benefit from reduced fat, including saturated fat, on myocardial infarction, cardiovascular or all-cause mortality.2 It is instructive to note that in an angiographic study of postmenopausal women with CHD, greater intake of saturated fat was associated with less progression of atherosclerosis whereas carbohydrate and polyunsaturated fat intake were associated with greater progression.3

Preventing the development of atherosclerosis is important but it is atherothrombosis that is the real killer

The inflammatory processes that contribute to cholesterol deposition within the artery wall and subsequent plaque formation (atherosclerosis), more closely resembles a 'pimple' (figure 1). Most cardiac events occur at sites with <70% coronary artery obstruction and these do not generate ischaemia on stress testing.4 When plaques rupture (analogous to a pimple bursting), coronary thrombosis and myocardial infarction can occur within minutes. The limitation of the current plumbing approach ('unclogging a pipe') to the management of coronary disease is revealed by a series of randomised controlled trials (RCTs) which prove that stenting significantly obstructive stable lesions fail to prevent myocardial infarction or to reduce mortality.5

Dietary RCTs with outcome benefit in primary and secondary prevention

In comparison with advice to follow a 'low fat' diet (37% fat), an energy-unrestricted Mediterranean diet (41% fat) supplemented with at least four tablespoons of extra virgin olive oil or a handful of nuts (PREDIMED) achieved a significant 30% (number needed to treat (NNT)=61) reduction in cardiovascular events in over 7500 high-risk patients. Furthermore, the Lyon Heart study showed that adopting a Mediterranean diet in secondary prevention improved hard outcomes for both recurrent myocardial infarction (NNT=18) and all-cause mortality (NNT=30), despite there being no significant difference in plasma low-density lipoprotein (LDL) cholesterol between the two groups. It is the alpha linoleic acid, polyphenols and omega-3 fatty acids present in nuts, extra virgin olive oil, vegetables and oily fish that rapidly attenuate inflammation and coronary thrombosis.6 Both control diets in these studies were relatively healthy, which make it highly likely that even larger benefits would be observed if the Mediterranean diets discussed above were compared with a typical western diet.

LDL cholesterol risk has been exaggerated

Decades of emphasis on the primacy of lowering plasma cholesterol, as if this was an end in itself and driving a market of 'proven to lower cholesterol' and 'low-fat' foods and medications, has been misguided. Selective reporting may partly explain this misconception. Reanalysis of unpublished data from the Sydney Diet Heart Study and the Minnesota coronary experiment reveal replacing saturated fat with linoleic acid containing vegetable oils increased mortality risk despite significant reductions in LDL and total cholesterol (TC).7

A high TC to high-density lipoprotein (HDL) ratio is the best predictor of cardiovascular risk (hence this calculation, not LDL, is used in recognised cardiovascular risk calculators such as that from Framingham). A high TC to HDL ratio is also a surrogate marker for insulin resistance (ie, chronically elevated serum insulin at the root of heart disease, type 2 diabetes and obesity). And in those over 60 years, a recent systematic review concluded that LDL cholesterol is not associated with cardiovascular disease and is inversely associated with all-cause mortality.8 A high TC to HDL ratio drops rapidly with dietary changes such as replacing refined carbohydrates with healthy high fat foods.

A simple way to combat insulin resistance (chronically high levels of serum insulin) and inflammation

Compared with physically inactive individuals, those who walk briskly at or above 150 min/week can increase life expectancy by 3.4–4.5 years independent of body weight.9 Regular brisk walking may also be more effective than running in preventing coronary disease. And just 30 min of moderate activity a day more than three times/week significantly improves insulin sensitivity and helps reverse insulin resistance (ie, lowers the chronically elevated levels of insulin that are associated with obesity) within months in sedentary middle-aged adults. This occurs independent of weight loss and suggests even a little activity goes a long way.

Another risk factor for CHD is environmental stress. Childhood trauma can lead to an average decrease in life expectancy of 20 years. Chronic stress increases glucocorticoid receptor resistance, which results in failure to down regulate the inflammatory response. Combining a complete lifestyle approach of a healthful diet, regular movement and stress reduction will improve quality of life, reduce cardiovascular and all-cause mortality.10 It is time to shift the public health message in the prevention and treatment of coronary artery disease away from measuring serum lipids and reducing dietary saturated fat. Coronary artery disease is a chronic inflammatory disease and it can be reduced effectively by walking 22 min a day and eating real food. There is no business model or market to help spread this simple yet powerful intervention.

12.11.17

Tendons

Additional in-series compliance reduces muscle force summation and alters the time course of force relaxation during fixed-end contractions


jeb.biologists.org
Additional in-series compliance reduces muscle force summation and alters the time course of force relaxation during fixed-end contractions
Dean L. Mayfield, Bradley S. Launikonis, Andrew G. Cresswell, Glen A. Lichtwark
45-57 minutes

Additional in-series compliance reduces muscle force summation and alters the time course of force relaxation during fixed-end contractions

Journal of Experimental Biology 2016 219: 3587-3596; doi: 10.1242/jeb.143123
Loading
ABSTRACT

There are high mechanical demands placed on skeletal muscles in movements requiring rapid acceleration of the body or its limbs. Tendons are responsible for transmitting muscle forces, but, because of their elasticity, can manipulate the mechanics of the internal contractile apparatus. Shortening of the contractile apparatus against the stretch of tendon affects force generation according to known mechanical properties; however, the extent to which differences in tendon compliance alter force development in response to a burst of electrical impulses is unclear. To establish the influence of series compliance on force summation, we studied electrically evoked doublet contractions in the cane toad peroneus muscle in the presence and absence of a compliant artificial tendon. Additional series compliance reduced tetanic force by two-thirds, a finding predicted based on the force–length property of skeletal muscle. Doublet force and force–time integral expressed relative to the twitch were also reduced by additional series compliance. Active shortening over a larger range of the ascending limb of the force–length curve and at a higher velocity, leading to a progressive reduction in force-generating potential, could be responsible. Muscle–tendon interaction may also explain the accelerated time course of force relaxation in the presence of additional compliance. Our findings suggest that a compliant tendon limits force summation under constant-length conditions. However, high series compliance can be mechanically advantageous when a muscle–tendon unit is actively stretched, permitting muscle fibres to generate force almost isometrically, as shown during stretch–shorten cycles in locomotor activities. Restricting active shortening would likely favour rapid force development.
INTRODUCTION

Animals must be capable of producing rapid movements to interact successfully with their physical environment. Locomotor activities employed during prey capture and predator evasion place especially high mechanical demands on skeletal muscle performance. For instance, the ankle extensors of the kangaroo rat and cat generate peak forces during jumping that exceed those measured in situ under maximal isometric conditions (Walmsley et al., 1978; Biewener et al., 1988). High mechanical outputs are not confined to accelerations, which necessitate that muscles generate mechanical energy. Skeletal muscles must also rapidly absorb mechanical energy to quickly arrest the body's motion (Gabaldón et al., 2004). Small animals in particular must have neuromuscular systems adept at generating forces at very high rates because of the comparatively shorter time that their limbs spend in contact with the ground during locomotion (Kram and Taylor, 1990).

Muscle fibre force production is largely constrained by the force–length (Gordon et al., 1966) and force–velocity (Fenn and Marsh, 1935) properties of the contractile apparatus. For a given activation level, contractile force is a function of myofilament overlap and cross-bridge cycling dynamics. Contractile speed, including the maximum velocity of fibre shortening and maximum rates of force development and relaxation, is governed by the kinetics of actin–myosin interaction and sarcoplasmic reticulum Ca2+ release and reuptake (Briggs et al., 1977; Edman et al., 1988; Metzger and Moss, 1990; Gordon et al., 2000). Fibre type-specific expressions of the motor protein myosin (Edman et al., 1988; Bottinelli et al., 1991), and fibre type-related differences in Ca2+ dynamics (Baylor and Hollingworth, 2003; Barclay, 2012) and contractile apparatus Ca2+ sensitivity (Stephenson and Williams, 1981) mean that the mechanical output of whole muscle is also a function of fibre type composition (Harridge et al., 1996). The performance of skeletal muscle in functional terms, as either a powerful motor or brake, is ultimately dependent on both high contractile force and speed being effectively transferred to the skeletal system.

To exert influence over the skeletal system, internally generated forces must be transmitted to the skeletal system via elastic tendinous structures. As the passive structures of the series elastic element (SEE) elongate under muscle tension according to their structural and material properties (Lieber et al., 1991), series elastic compliance presents as a mechanical obstacle to force transmission. When the length of the muscle–tendon unit (MTU) is held constant during activation, active muscle fibres are permitted to shorten against the stretch of the SEE (Griffiths, 1991; Buchanan and Marsh, 2001). The amount of internal shortening afforded by the SEE, expressed as a percentage of resting fibre length or the fibre length at which force is maximal (i.e. fixed-end compliance), is largely a function of muscle design. Fixed-end compliance increases as the relative difference in length between the SEE and muscle fibre increases (Zajac, 1989). Animal and human skeletal muscles cover a broad range of tendon length-to-fibre length ratios (Zajac, 1989; Biewener and Roberts, 2000). As a consequence, the fixed-end compliance of skeletal muscle varies considerably (Biewener and Roberts, 2000): horse superficial digital flexor 81% (Brown et al., 2003; Swanstrom et al., 2005), human medial gastrocnemius 35% (Narici et al., 1996) cat medial gastrocnemius 28% (Griffiths, 1991), guinea fowl lateral gastrocnemius 13% (Buchanan and Marsh, 2001), frog semitendinosus 11% (Lieber et al., 1991, 1992), hopping mouse gastrocnemius 6% (Ettema, 1996) and rat gastrocnemius 5% (Ettema, 1996). Experimental findings support distinct mechanical and functional roles for tendons of low and high series compliance (Biewener et al., 1981; Biewener and Blickhan, 1988; Ettema, 1996). Some studies have concluded that the structural design of the SEE appears to be ecologically driven (e.g. Biewener and Blickhan, 1988).
List of symbols and abbreviations

FTI
    force–time integral
ISI
    interstimulus interval
L0
    muscle fibre bundle length at which twitch force is maximal
MTU
    muscle–tendon unit
SEE
    series elastic element

As the SEE influences both force transmission and internal shortening, and is diverse in morphology, series elastic compliance is an important mechanical determinant of the rate of force development and the force-generating capacity of muscle. Much of what we know about the effects of series elastic compliance on contractile behaviour is owing to the work of A. V. Hill. Hill (1951) established that adding compliance in-series with muscle reduced twitch force and prolonged the time to peak tension. Hill (1949) also demonstrated that when the effect of series elastic compliance on internal contractile dynamics was effectively abolished, by applying a rapid, yet brief stretch to the MTU at stimulation onset, twitch force and the rate of force rise increased substantially. A similar response was observed when active shortening against the stretch of the SEE was largely prevented by a feedback control signal that adjusted the length of an isolated bullfrog plantaris MTU (Sawicki and Roberts, 2009). We recently demonstrated for the human triceps surae, which has high fixed-end compliance, that the mechanical properties of the twitch could be dramatically increased by only a modest reduction in fascicle shortening amplitude and velocity induced by a rapid stretch of relatively low amplitude (Mayfield et al., 2016). Stretch of the MTU early in the twitch was shown to also influence the force generated by a second stimulating pulse delivered at the post-stretch MTU length, suggesting that the depressant effect of active shortening on contractile force may influence force summation under conditions where internal shortening is permitted. Findings of this nature highlight the necessity to consider muscle–tendon interaction when interpreting muscle contractile properties under constant-length conditions. Whether differences in series elastic compliance over the range experienced by animals influence the relative summation of force owing to a burst of electrical impulses is less clear.

Applying a rapid stretch to the MTU, as a means for simulating lower series elastic compliance, is limited in that the effective stiffness of the SEE is modified only for the duration of the stretch. Further to this, the degree to which the effective stiffness is modified by a given amplitude of stretch is dependent on the active state of the muscle during the stretch. There is less relative resistance to active shortening when activation is achieved with two stimuli, particularly at a high frequency of stimulation, owing to higher rates of shortening and force rise (Mayfield et al., 2016). A more suitable model for studying the direct influence of series compliance on force summation would permit the compliance of the SEE to be manipulated to align with different physiological compliances for comparative purposes, but also be maintained for the duration of the contraction. Serial attachment of a thin latex strip to an isolated muscle preparation has been demonstrated to be an effective means for simulating in vivo tendon dynamics (Lichtwark and Barclay, 2010).

The purpose of the present study was to examine the influence of series elastic compliance on force summation owing to doublet stimulation [brief interstimulus interval (ISI)]. We attached a compliant artificial tendon, as described above, in-series with a fibre bundle isolated from the peroneus muscle of a cane toad (Rhinella marina). Twitch and doublet force were measured during fixed-end contractions at a range of fibre bundle lengths in the absence and presence of a compliant tendon to characterize the effects of series compliance on muscle contractile properties and force summation. On the basis that additional series compliance would permit an increase in active shortening of the internal contractile apparatus and, therefore, bring about a reduction in force-generating capacity, we hypothesized that additional series compliance would reduce relative force summation.
MATERIALS AND METHODS
Animals

Cane toads [Rhinella marina (Linnaeus 1758)] were captured in local watercourses and housed in an enclosure at The University of Queensland until use. Toads were placed in a refrigerator (4°C) for approximately 1 h prior to euthanasia to ease stress on the animal. Toads were euthanized by double pithing. All animal handling procedures were carried out in accordance with the guidelines of The University of Queensland's Animal Ethics Committee.
In vitro preparation

The peroneus muscle and tendons were dissected from both hind limbs, blotted on filter paper (Whatman Grade 1) and placed in Ringer's solution at room temperature. Bundles of fibres (N=15) were then dissected from the isolated muscle under a microscope. Aluminium foil clips were attached to the proximal and distal tendinous regions of each fibre bundle for mounting of the preparation. The distal clip was designed to permit the inclusion of a thin strip of latex in-series with the fibre bundle (Lichtwark and Barclay, 2010). The dimensions of the latex strip determined the series elastic compliance of the preparation. The latex strip, subsequently referred to as a compliant artificial tendon, was of dimensions that permitted the fibre bundle to actively shorten by 20–25% of its resting length during a fixed-end tetanic contraction (based on the approximate force-generating capacity of the muscle bundles).

The muscle preparation was mounted between a force transducer and micrometre, and lay submerged in Ringer's solution in a temperature-controlled bath (custom built). The Ringer's solution was of the following composition (mmol l−1): NaCl 112, CaCl2 2.5, MgCl2 1, HEPES 20, KCl 3.3 and glucose 5, adjusted to pH 7.4 at room temperature using NaOH. Force development and relaxation in vertebrate skeletal muscle exhibit strong thermal dependencies (Bennett, 1984). Measurements in the present study were made at 30°C to maximize relative doublet summation in amphibian muscle (Ranatunga, 1977) and increase the force-limiting potential of the compliant artificial tendon.
In vitro data collection

An electrical stimulator (SD9 Stimulator, Grass Technologies, Quincy, MA, USA) delivered supramaximal square-wave pulses to fibres via two fine platinum wire electrodes that ran parallel to the length of the fibre bundle in close proximity. Pulse width was set at 500 µs and stimulus strength set 10% above that eliciting maximum twitch force (field strength of approximately 30–40 V cm−1). With the muscle preparation mounted at the aluminium foil clips at either end, fibre bundle length was adjusted to maximize twitch force (optimal length, L0). Force output was sampled and displayed at 2000 Hz with a 16-bit Micro1401 and Spike2 data collection system (Cambridge Electronics Design, Cambridge, UK).

In the absence of the compliant artificial tendon, twitch, doublet and tetanic force were measured at L0. Additional measurements of twitch and doublet force were subsequently made at fibre bundle lengths of L0−2 mm (L0−2 mm), L0−1 mm (L0−1 mm) and L0+1 mm (L0+1 mm) to examine the effect of series compliance on the known length dependence of force summation. Passive force was recorded at each fibre bundle length and subsequently used to set fibre bundle length with the compliant artificial tendon serially attached (see below). An interval of at least 1 min was provided between successive twitch and doublet contractions to minimize the effects of muscle fatigue and oxidative stress. A final measurement of twitch force was obtained at L0 to assess muscle performance. Once force measurements had been completed without the artificial tendon serially attached, the aluminium foil clip at the distal end of the preparation was dismounted from the micrometre and the free end of the artificial tendon was mounted. To obtain the desired fibre bundle length with the artificial tendon mounted, the length of the now more compliant MTU was adjusted until the passive force was equal to that previously measured at the corresponding fibre bundle length without the artificial tendon mounted. Twitch and doublet force were subsequently measured at each of the four fibre bundle lengths, and tetanic force was measured at L0. A final measurement of twitch force was obtained at L0 to assess muscular fatigue. Doublet stimulation was performed with ISIs of 5, 20 and 40 ms. The dynamic behaviour of fibre bundles serially attached to a complaint artificial tendon was recorded by a high-speed (240 Hz) compact digital camera fixed directly above the bath for estimation of muscle strain.
Data analysis

Force signals were imported into MATLAB (R2014a, MathWorks, Natick, MA, USA) for processing and analysis. To remove undesired high-frequency components from the imported data, a custom-written script was implemented to apply a second-order, 80 Hz low-pass Butterworth filter (dual pass). Twitch and doublet contractions were analyzed to determine contraction time, half-relaxation time, peak active force and the force–time integral (FTI). The contraction time of doublet responses was defined as the time interval between the second stimulus pulse and peak force. Peak active force in the presence of a compliant artificial tendon was calculated after estimating the reduction in passive force owing to shortening of the fibre bundle against the stretch of the artificial tendon. Traditional approaches to calculating active force assume passive force to remain constant during active force development, subtracting passive force at rest from peak total force to determine active force. Though this may be an appropriate method when internal shortening is restricted by a stiff SEE or by the removal of tendinous tissues, and thus when the length of the parallel elastic element remains relatively constant, it underestimates the active force developed by a muscle in-series with a compliant SEE (MacIntosh and MacNaughton, 2005; Hoffman et al., 2012). To approximate the reduction in passive force during contraction owing to active shortening in the presence of a compliant artificial tendon, fibre bundle length during twitch and doublet contractions at L0 was measured. A quadratic function was then applied to values of passive force obtained at each resting fibre bundle length, and the reduction in passive force during active force development owing to active shortening was determined from the interpolated passive force–length data. Peak active force was calculated by subtracting the corrected passive force from peak total force. This process was performed only for trials with the artificial tendon attached. Active shortening was assumed to be negligible in the absence of an artificial tendon. Accordingly, passive force at rest was used for the calculation of peak active force for twitch and doublet contractions without an artificial tendon. Relative force summation was calculated by normalizing doublet force to twitch force at each fibre bundle initial length. Measurements of fibre bundle strain (Δfibre bundle length/L0) at L0 were calculated from digitized 2D images.
Statistical analysis

To determine whether there were effects of series elastic compliance and fibre bundle initial length on each parameter of muscle performance, a two-way repeated measures ANOVA (tendon compliance×fibre bundle initial length) was performed in statistical software (Prism 6, GraphPad Software, La Jolla, CA, USA). A post hoc analysis was performed using Tukey's method of controlling significance level for multiple pair-wise comparisons. Statistical significance was set at P≤0.05. Data are reported in the text as means±s.d., and presented in the figures as means±s.e.m.
RESULTS

Additional series elastic compliance in the form of a compliant latex strip led to an increase in the amplitude and rate of active shortening and a reduction in peak force during tetanic, doublet and twitch fixed-end contractions. An example of the time courses of fibre bundle force and shortening during each contraction type with and without a compliant artificial tendon attached is shown in Fig. 1. Waveform-averaged tetanic, doublet and twitch force for fixed-end contractions performed at L0 with and without serial attachment of a compliant artificial tendon are illustrated in Fig. 2. The addition of a compliant artificial tendon reduced tetanic force at L0 by 66±9% (P<0.01; Fig. 1A). Additional series compliance also reduced the tetanic rate of force development and relaxation by 70% (5.52±2.2 versus 1.57±0.49 mN ms−1, P<0.01) and 59% (5.36±1.75 versus 2.06±0.5 mN ms−1, P<0.01), respectively. Muscle fibre bundle strain against the stretch of the compliant artificial tendon during a tetanic contraction at L0 was 22±4%. Additional series compliance reduced twitch and doublet force by 65±8% and 68±6%, respectively.
Fig. 1.

Typical time course of force production and shortening during fixed-end contractions of a cane toad peroneus muscle fibre bundle with and without a compliant artificial tendon attached in-series. Additional series compliance led to a reduction in tetanic force (A) and a substantial increase in the amplitude and rate of active shortening (C). Active shortening during force generation owing to twitch and doublet stimulation (B) in the presence of additional series compliance was also of a considerable amplitude (D). Active shortening during a doublet was in fact of a greater amplitude than that permitted under maximal conditions in the absence of additional series compliance. Fibre bundle length changes during twitch and doublet contractions in the absence of additional compliance were not measurable and, therefore, were assumed to be negligible. Arrows in B denote timing of stimulation pulses. Doublet ISIs are 5 and 40 ms. Data are shown from the same muscle fibre bundle.
Fig. 2.

Tetanic, doublet and twitch force during fixed-end contractions with and without a compliant artificial tendon attached in-series. Additional series compliance considerably reduced tetanic (A), doublet (Dblt; B) and twitch (Tw; B) force. Data are waveform averages (solid) and the s.e.m. (dashed) of all fibre bundle data (N=15). Tetanic stimulation was for 240 ms at 100 Hz. Doublet stimulation ISI is 5 ms.

Fig. 3 illustrates passive and active forces, and the FTI, as a function of fibre bundle initial length for twitch and doublet contractions performed with and without a compliant artificial tendon attached. Passive tension increased as a function of fibre bundle length in the presence and absence of additional series compliance (P<0.01), but the change in passive tension owing to step increases in fibre bundle length did not differ between compliant and stiff conditions (P=0.55; Fig. 3A,B). This indicates that the length of the fibre bundle prior to contraction at each length step was similar with and without the compliant tendon attached. Additional series compliance reduced the active force and FTI of twitch and doublet contractions (P<0.01) at all fibre bundle initial lengths. Twitch active force and FTI were reduced by 54–63% and 53–73%, respectively, depending on the initial length of the fibre bundle (Fig. 3A,C). Doublet active force and FTI were reduced by 60–68% and 58–75%, respectively, depending on the initial length of the fibre bundle (Fig. 3B,D).
Fig. 3.

Twitch and doublet active force and force–time integral (FTI) as a function of fibre bundle initial length for fixed-end contractions with and without a compliant artificial tendon attached in-series. Passive tension at rest (open squares) did not differ between conditions at each length step (P=0.55), indicating similar fibre bundle lengths prior to contraction. Additional series compliance considerably reduced twitch and doublet active force (A,B) and FTI (C,D) at all fibre bundle initial lengths (P<0.01). Doublet data are for ISIs of 5 ms (solid circles) and 40 ms (open circles). Data are means±s.e.m., N=15. A two-way repeated-measures ANOVA (Tukey post hoc test) was used for determination of statistical significance.

Twitch and doublet force responses were normalized to peak twitch force for the purpose of examining relative force summation and the time course of force rise and relaxation as a function of series compliance. Waveform-averaged normalized force responses are illustrated in Fig. 4, where the effect of additional series compliance on the relative magnitude and time course of the summated response is clearly visible. Most notably, the addition of a compliant artificial tendon reduced relative force summation at the shortest fibre bundle initial lengths and accelerated the decay of force at the longest fibre bundle initial lengths (Fig. 4A,C). There were main effects of series compliance and fibre bundle initial length on both relative force summation and the relative FTI (Fig. 5). The addition of a compliant tendon reduced both relative force summation (5 and 40 ms, P<0.01) and the relative FTI (5 and 40 ms, P<0.01). However, the effect of initial length on force summation and FTI changed as a function of ISI. With respect to an ISI of 5 ms, both force summation (P<0.01) and FTI (P<0.01) decreased as a function of increasing fibre bundle initial length (Fig. 5A,C). Conversely, force summation increased as a function of initial length for an ISI of 40 ms (P<0.01; Fig. 5B). There was no main effect of initial length on relative FTI for an ISI of 40 ms (P=0.07; Fig. 5D). The force-limiting effect of additional series compliance was greatest at short fibre bundle initial lengths for both relative force summation (tendon compliance×fibre bundle initial length interaction: 5 and 40 ms, P<0.01) and relative FTI (tendon compliance×fibre bundle initial length interaction: 5 ms, P<0.01; 40 ms, P<0.05).
Fig. 4.

Relative force summation for fixed-end contractions with and without a compliant artificial tendon attached in-series. Twitch and doublet force at L0−2 mm (A), L0 (B) and L0+1 mm (C) are expressed relative to peak twitch force at the same fibre bundle initial length for compliant and stiff conditions. Additional series compliance reduced relative force summation at fibre bundle initial lengths between L0−2 mm and L0. Additional series compliance also tended to prolong the rise time of force and accelerate the time course of force relaxation. Data are waveform averages of all fibre bundle data (N=15).
Fig. 5.

Relative force summation and relative FTI as a function of fibre bundle initial length for fixed-end contractions with and without a compliant artificial tendon attached in-series. Additional series compliance reduced relative force summation (A,B) and relative FTI (C,D) (P<0.01) in a length-dependent manner. There was a main effect of fibre bundle initial length for both measures (P<0.01). The direction of the length-dependent response was a function of ISI. Peak doublet force and FTI were normalized to corresponding values of the twitch response at the same fibre bundle initial length. Data are means±s.e.m., N=15. A two-way repeated-measures ANOVA (Tukey post hoc test) was used for determination of statistical significance.

Additional series compliance altered the time course of force development and relaxation for twitch and doublet contractions (Fig. 6). The size of the effect was dependent on fibre bundle initial length. There were main effects of both series compliance and fibre bundle initial length on contraction time and half-relaxation time. The addition of a compliant tendon increased twitch and doublet contraction time by 3–9% (P<0.01) and 1–12% (5 and 40 ms, P<0.01), respectively, depending on the initial length of the fibre bundle (Fig. 6A,B). Contraction time also increased as a function of increasing initial length for twitch (P<0.01) and doublet contractions (5 and 40 ms, P<0.01; Fig. 6A,B). The size of the series compliance effect decreased as a function of increasing initial length for twitch and doublet (5 ms) contractions (tendon compliance×fibre bundle initial length interaction, P<0.01), and was almost absent at a L0+1 mm (Fig. 6A,B).
Fig. 6.

Contraction time and half-relaxation time of fixed-end contractions with and without a compliant artificial tendon attached in-series. Additional series compliance prolonged the contraction time (A,B) and reduced the half-relaxation time (C,D) of twitch and doublet contractions (P<0.01) in a length-dependent manner. The effect of additional series compliance was considerably larger for the half-relaxation time. Both measures increased as a function of fibre bundle initial length (P<0.01); however, they were less sensitive to changes in fibre bundle initial length in the presence of additional series compliance. Doublet data are for ISIs of 5 ms (solid symbols) and 40 ms (open symbols). Data are means±s.e.m., N=15. A two-way repeated-measures ANOVA (Tukey post hoc test) was used for determination of statistical significance.

The effect of additional series compliance on the time course of force rise was modest with respect to the accelerative effect of compliance on force relaxation. The addition of a compliant tendon reduced twitch and doublet half-relaxation time by 13–32% (P<0.01) and 16–44% (5 and 40 ms, P<0.01), respectively, depending on the initial length of the fibre bundle (Fig. 6C,D). Half-relaxation time increased as a function of increasing length for twitch (P<0.01) and doublet contractions (5 and 40 ms, P<0.01; Fig. 6C,D). The size of the series compliance effect increased as a function of fibre bundle initial length for twitch and doublet (5 and 40 ms) contractions (tendon compliance×fibre bundle initial length interaction, P<0.01). However, in contrast to the effect of additional series compliance on contraction time, half-relaxation time was reduced by a considerable amount at all fibre bundle initial lengths.
DISCUSSION

In this study, a compliant artificial tendon was attached in-series to an isolated muscle preparation as a means of investigating the effects of series elastic compliance on force summation. In addition to substantially constraining muscle force generation, active shortening of the internal contractile apparatus afforded by additional series compliance reduced doublet force summation and altered the time course of force rise and relaxation. Doublet force and doublet FTI expressed relative to the twitch were lower when a muscle fibre bundle was serially attached to a compliant artificial tendon. Additional series compliance also brought about an increase in the rise time of twitch and doublet force, and accelerated the time course of force decay. The reduced contractile output of a muscle fibre bundle in-series with a compliant SEE can be understood in terms of the dynamic factors that influence force generation in skeletal muscle. The same factors that constrain contractile apparatus force output likely contribute to limiting force summation under conditions where active shortening against stretch of the SEE is substantial.

A compliant artificial tendon reduced the peak force and FTI of all contraction types to one-third of that generated under comparatively stiff conditions. A loss in force-generating potential of this magnitude is predictable when the effects of series elastic compliance on muscle fibre dynamics are considered. Muscle fibre bundle shortening against the extension of the compliant artificial tendon was measured to be 22% of resting bundle length during a fixed-end tetanic contraction at L0 in the present study. Thus, the addition of a compliant tendon allowed for fibre bundles to shorten onto the ascending limb of the force–length curve, where force generation is reduced (Gordon et al., 1966). The absence of an appreciable increase in twitch and doublet force in response to step increases in initial length suggests that the artificial tendon was of a sufficient compliance to permit fibre bundles to shorten onto a similar low-force region of the ascending limb. This assertion is in agreement with models of muscle–tendon interaction, which predict that the force–length relationship should shift rightward and become skewed toward initial sarcomere lengths on the ascending limb as series elastic compliance increases (Lieber et al., 1992). The plantaris muscle of the bullfrog has a high fixed-end compliance (∼30%; Sawicki et al., 2015b), but avoids operating at fibre lengths on the ascending limb during the take-off phase of jumping by beginning at lengths on the descending limb. Force attenuation in this muscle is mitigated by actively shortening from lengths beyond optimum length onto the plateau region prior to take-off (Azizi and Roberts, 2010).

The addition of a compliant tendon reduced the relative amplitude and relative FTI of the doublet response for both ISIs employed in the present study. Altered force summation in the presence of additional series compliance is likely to be due to, at least in part, considerable muscle fibre shortening during the rise of force. Though shortening velocity was not measured in the present study, a higher velocity of shortening can be inferred from the larger amplitude of shortening permitted in the presence of additional series compliance. High velocities of shortening under constant-length conditions, and in response to high-frequency doublet stimulation, have previously been demonstrated in vivo for a muscle group with a compliant tendon (Mayfield et al., 2015). A significant reduction in the rate of force development under the compliant conditions imposed in the present study suggests that the fibre bundles did in fact operate at velocities at which force production is considerably limited (Hill, 1938). When a second pulse is delivered during the early rise in twitch force, before or immediately after the peak in fibre shortening velocity, a higher peak velocity of shortening is achieved. For instance, individual muscles of the human triceps surae achieve peak velocities during a high-frequency doublet that are 50% higher than during a twitch (Mayfield et al., 2015). We argue that the higher velocity of active shortening afforded by the compliant tendon was sufficient to cause a considerable reduction in the force-generating capacity of the contractile apparatus during force development, such that the relative force contribution of a second stimulating pulse was reduced with respect to stiffer conditions. Twitch force has been shown to increase significantly in response to a modest reduction in the velocity of shortening induced by an increase in SEE effective stiffness (Mayfield et al., 2016). Sandercock (2000) also concluded that a higher velocity of active shortening during force development could likely explain the reduction in force summation demonstrated when individual parts of whole muscle were activated simultaneously rather than individually, arguing that a common SEE permitted greater internal shortening during synchronous activity.

Additional series elastic compliance also affected the operating lengths of muscle fibre bundles during activation owing to the first and second stimulating pulses. Greater amplitudes of active shortening meant that muscle fibre bundle lengths at the onset of the second pulse were shorter and less favourable for force production. Additional shortening that occurs as force rises in response to a second pulse is also considerable under compliant conditions (Mayfield et al., 2015). Therefore, fibres in the compliant condition were allowed to continue to move down the ascending limb of the force–length curve, further limiting the force-generating potential of the second stimulus. We believe that the reduction in relative force summation in the compliant condition likely reflects a shortening-induced reduction in force-generating capacity, as explained by the force–length and force–velocity relationships. History-dependent contractile properties, specifically those concerned with actin–myosin interaction subsequent to active shortening (Edman, 1975; Herzog and Leonard, 1997), may also contribute to a progressive loss in force-generating potential.

When values of force summation reported in the literature for animal (Ranatunga, 1977; Wallinga-de Jonge et al., 1980; Parmiggiani and Stein, 1981) and, specifically, human muscles (Duchateau and Hainaut, 1986; Baudry et al., 2005) are considered, the reduction in relative force summation owing to additional series elastic compliance was small. This finding may be due, in part, to the animal model selected. In agreement with previous work on frog muscle at 22°C (Ranatunga, 1977), relative force summation in response to high-frequency doublet stimulation in the absence of additional series compliance was low relative to mammalian muscle (Parmiggiani and Stein, 1981; Duchateau and Hainaut, 1986) and did not exceed that predicted from linear summation of the twitch, except at a short fibre bundle length. Therefore, the potential for internal shortening afforded by additional compliance to reduce relative force summation was likely low. Considerably larger twitch-to-tetanus ratios have also been reported for amphibian muscle (see Close, 1965), even at temperatures exceeding physiological norms (Ranatunga, 1977). This suggests that, relative to a twitch, there is a low capacity for a second stimulus to bring about a significant increase in mechanical activation in amphibian muscle. By contrast, the relative force contribution of a second stimulus in mammalian muscle can be two to three times larger in amplitude than that of the twitch and be of an augmented speed and duration (Parmiggiani and Stein, 1981; Duchateau and Hainaut, 1986; Baudry et al., 2005), giving rise to a summated response three to four times larger than the twitch.

Mammalian muscle may have been more suitable for this investigation on the basis that there are elements of excitation–contraction coupling that clearly operate in a nonlinear manner to promote force generation when excitation occurs in quick succession. High series compliance may have additional consequences for force summation in mammalian muscle if shortening of the internal contractile apparatus were to interfere with one or more of these processes (e.g. thin filament activation; Edman, 1975; Gordon et al., 2000). Differences in excitation–contraction coupling may reflect the different lifestyles of various taxa. Ca2+ release and reuptake kinetics, and Ca2+ regulation of thin filament activation likely play crucial roles in determining force summation. Inactivation of Ca2+ release, whereby less Ca2+ is released from the sarcoplasmic reticulum in response to a second action potential when it immediately follows an initial action potential, is indeed a property that differs between amphibian and mammalian muscles (Caputo et al., 2004). Amphibian and mammalian muscle also have distinct sarcoplasmic reticulum ryanodine receptor (Ca2+ release channel) isoforms, Ca2+ release channel structural configuration at the site of Ca2+ release, and arrangement of the junctional membranes (Jayasinghe and Launikonis, 2013), which position the ryanodine receptors relative to the contractile apparatus (see Hollingworth and Baylor, 2013).

Additional series compliance induced a modest increase in the rise time of twitch and doublet force. The time to peak twitch tension has been shown previously to become systematically delayed as the compliance of an external spring is increased (Hill, 1951; Bawa et al., 1976). It has been suggested that increasing the series elastic compliance increases the length and duration for which the contractile apparatus must shorten before force equilibrium is reached (Hill, 1951). The delay in peak force induced by additional series compliance in the present study was small with respect to that observed for frog sartorius at 0°C (Hill, 1951), but similar to that observed for cat plantaris at a physiological temperature and when additional series compliance reduced twitch force by a similar extent (∼70%; Bawa et al., 1976). Some of this variation may be explained by the thermal (Bennett, 1984; Stephenson and Williams, 1985), fibre-type (Stephenson and Williams, 1981, 1985) and length dependence (Stephenson and Williams, 1982) of numerous processes in the series of events leading to contraction and relaxation. It also remains unclear what influence active shortening has on the Ca2+ sensitivity of the contractile apparatus (Gordon et al., 2000), which increases as a function of sarcomere length (Stephenson and Williams, 1982) when examined under purely isometric conditions.

Half-relaxation time was reduced considerably in the presence of additional series compliance, especially at longer initial fibre bundle lengths. Relative to the rise time of force in the presence of additional series elastic compliance, half-relaxation time was also less sensitive to step increases in initial fibre bundle length. The decay of twitch force has been shown previously to be more sensitive to initial muscle length than that of the rise time of force (Close, 1964; Wallinga-de Jonge et al., 1980). We suggest that the amplitude of active shortening permitted under the compliant conditions in the present study may have limited the influence of initial length on relaxation kinetics. Assuming on the basis of the force–length data obtained in the compliant condition that fibre bundles shortened onto a similar region of the ascending limb, differences in active fibre bundle length were likely less than the differences in initial length caused by the lengthening steps. Similar active lengths could explain the depressed effect of initial length on half-relaxation time. This conclusion is supported by evidence demonstrating the sensitivity of half-relaxation time to initial length to be lower at lengths below L0 (Jewell and Wilkie, 1960; Close, 1964) and our own finding that the time course of force decay was abbreviated more for doublet stimulation, which induced additional shortening. In agreement with the literature, half-relaxation time was more sensitive to initial fibre bundle length (52–56% increase) than was force rise time (30–32% increase) when the compliant tendon was absent. Bawa and colleagues (1976) reported a decrease in twitch half-relaxation time in response to an increase in spring compliance for cat soleus, but found half-relaxation time to increase for plantaris under similar conditions. Fibre type composition and the length range over which the muscle is tested could potentially modify the effect that series compliance has on force rise and relaxation by influencing the Ca2+ sensitivity of the contractile apparatus.

A greater relative rate of force relaxation in the presence of additional series elastic compliance may also reflect the reduced ability of strongly bound cross-bridges to resist the lengthening imposed upon them by the recoil of the elastic artificial tendon at the onset of relaxation. It has been argued that as sarcomere length non-uniformities arise at the onset of contractile apparatus deactivation (Edman and Flitney, 1982), the capacity for strongly attached cross-bridges to avoid further slippage or 'give' rapidly declines (Caputo et al., 1994). Length perturbations imposed during the early phase of force relaxation have been demonstrated to accelerate the transition between slow and fast relaxation phases and abbreviate the decay of active tension (Caputo et al., 1994; Tesi et al., 2002). The strain dependence of myosin detachment kinetics has recently been simulated in a cross-bridge model (Campbell, 2016). The same model showed that actin–myosin movement during relaxation permitted by series elastic compliance accelerated the time course of force decay (Campbell, 2016). A transient increase in the myoplasmic Ca2+ concentration subsequent to a brief stretch delivered at relaxation onset, relative to an isometric control (Caputo et al., 1994; Wang and Kerrick, 2002), suggests that the dissociation of force-generating cross-bridges may also mobilize Ca2+ from the thin filament, which could act to further accelerate the decay of force (Caputo et al., 1994).

Our findings indicate that high series elastic compliance limits force summation and accelerates relaxation when MTU length is held constant. On this basis it might be argued that a compliant tendon would be detrimental to muscular performance during maximal efforts, for example, during jumping in anuran amphibians, given that this form of locomotion requires the mechanical behaviour of several lower limb muscles to be maximal to rapidly extend the hind limb (Peplowski and Marsh, 1997; Roberts and Marsh, 2003). However, by allowing contractile element length changes to be decoupled from MTU length changes, series elastic compliance, in fact, plays an important role in amplifying mechanical power, especially during jumping in frogs (Astley and Roberts, 2012, 2014). Series compliance provides a means for a catapult mechanism of power production, that is, strain energy can be stored in the SEE via muscle shortening during the loading phase and released at a rapid rate when the SEE recoils during forward propulsion (Astley and Roberts, 2012; Sawicki et al., 2015b). An elastic mechanism of this form enables MTU power generated during jumping to be amplified with respect to the capacity of the muscle (Peplowski and Marsh, 1997; Navas et al., 1999). Power amplification is reliant on dynamic processes generating moments that oppose joint excursion attempted by the muscle as it generates force and actively stretches the SEE, storing elastic energy (Astley and Roberts, 2014). Though an elastic tendon is imperative for power amplification, large-amplitude active shortening similar to that permitted by the compliant artificial tendon may render the muscle incapable of generating forces sufficient for jumping. The tendons of some anuran hind limb extensors are in fact quite stiff (Lieber et al., 1991; Trestik and Lieber, 1993) with respect to a number of distal muscles in humans and animals that participate in stretch–shorten cycles during locomotor tasks (Morgan et al., 1978; Griffiths, 1991; Narici et al., 1996). However, force loss associated with high series compliance can be compensated for by operating initially at fibre lengths on the descending limb, as has been shown for the bullfrog plantaris, which is likely permitted to achieve long starting lengths by possessing relatively compliant passive properties (Azizi and Roberts, 2010).

High series elastic compliance may be more desirable in species in which the MTU is actively stretched before shortening. A compliant tendon can permit near-isometric muscle fibre dynamics during stretch of the MTU, allowing muscle to function as a rigid force-producing strut (Biewener et al., 1981; Roberts et al., 1997). Energy stored in the stretched tendon can then be returned to the skeletal system when the tendon recoils during limb propulsion (Alexander and Vernon, 1975; Roberts et al., 1997). Strut-like muscle behaviour and cycling of elastic energy have been demonstrated clearly in the gastrocnemius and plantaris of tammar wallabies during hopping (Biewener et al., 1998), the gastrocnemius of turkeys during running (Roberts et al., 1997), and the gastrocnemius (Lichtwark et al., 2007; Farris and Sawicki, 2012) and soleus (Lai et al., 2015) of humans during walking and running. However, muscles with high series compliance are not confined to economic force production and elastic energy savings. In vitro studies of cyclical MTU behaviour indicate that the timing of activation can be modulated to achieve brake- or motor-like muscle performance (Sawicki et al., 2015a). Naturally occurring bursts of high-frequency motor unit activity, which can resemble doublet stimulation, are thought to be crucial to rapid force development (Duchateau and Baudry, 2014). High-frequency motor unit doublet discharges have been recorded at the onset of ballistic efforts (Van Cutsem et al., 1998) and fast corrective movements (Grimby, 1984), and during locomotor activity (Hennig and Lømo, 1985). Force summation in a compliant MTU owing to doublet stimulation or a burst of pulses may be more pronounced and bring about higher rates of force development if activation were to be coupled with stretch of the MTU, which would act to restrict active shortening relative to constant-length conditions.

In conclusion, force summation during a fixed-end contraction is reduced in the presence of a compliant artificial tendon designed to permit significant internal shortening. Shorter operating lengths and higher velocities of shortening relative to comparatively stiff conditions are believed to lead to a progressive reduction in relative force-generating capacity, as predicted by the force–length and force–velocity properties of the contractile apparatus. Active shortening afforded by a compliant tendon might also accelerate the decay of force. Though these findings demonstrate that high series compliance limits rapid force development under constant-length conditions, muscles with compliant tendons generate large forces economically during locomotor tasks owing to stretch–shorten cycles that allow for minimal internal shortening.
Acknowledgements

The authors would like to thank Adrian Lowry for designing and building the temperature-controlled bath for the force transducer, and Rocky Choi for assistance with experiments.
FOOTNOTES

    Competing interests

    The authors declare no competing or financial interests.

    Author contributions

    D.L.M., B.S.L., A.G.C. and G.A.L. were involved in the conception and design of the research. D.L.M. performed experiments and analyzed the data. D.L.M., A.G.C. and G.A.L. interpreted the results of experiments. D.L.M. and G.A.L. prepared the figures. D.L.M., B.S.L., A.G.C. and G.A.L. drafted, edited and revised the manuscript, and approved the final version of the manuscript.

    Funding

    This work was supported by the Australian Research Council Future Fellowship (FT140101309 to B.S.L.).

    Received May 11, 2016.
    Accepted August 31, 2016.

    © 2016. Published by The Company of Biologists Ltd

View Abstract

11.11.17

cosa fare? Qual è il significato in chiave psicosomatica? » Il Cibo della SaluteIl Cibo della Salute


ilcibodellasalute.com
cosa fare? Qual è il significato in chiave psicosomatica? » Il Cibo della SaluteIl Cibo della Salute
by Silvia Petruzzelli
5-6 minutes

Le emorroidi sono varici del sistema di vene posto in corrispondenza del canale anale. Queste vene, in determinate circostanze si dilatano, con prolasso e emorragie. E' un problema che affligge quasi la metà degli italiani.

Possiamo distinguere tra emorroidi interne (più Yang) ed emorroidi esterne (più Yin). E' una distinzione utile soprattutto nella fase iniziale. Se il problema persiste, ha meno senso, in quanto primo o poi quasi tutte le emorroidi tendono a protundere.

Cause e Rimedi

In linea di massima si tratta di un problema Yang: localizzazione profonda, nella parte bassa del tronco. In effetti, le cause sono prevalentemente di natura Yang: stress, alimentazione squilibrata, vita sedentaria, che comportano anche stitichezza.

Dal punto di vista del cibo è importante seguire un'alimentazione equilibrata, a base di cereali integrali, verdure di stagione, legumi e frutta. Aiutarsi con riso (il cereale dell'intestino!), creme di riso, verdure a foglia verde. L'intestino predilige alimenti caldi e cremosi. Ha bisogno di cose morbide, per equilibrare la sua natura che tende a creare indurimenti.

Aiutarsi anche con le alghe (come ad esempio, kombu, wakame, dulse, nori).

E' opportuno togliere, dalla propria alimentazione, i cibi più Yang, come i prodotti animali, i prodotti da forno (secchi e duri, piuttosto Yang anche quelli!).

Ma anche cibi estremi Yin come caffè, cacao, spezie, frutta tropicale, zucchero, prodotti raffinati.

Rimuovendo le cause, adottando un'alimentazione equilibrata (e seguendola correttamente), il problema in genere migliora. Se ciò non dovesse accadere, è probabile che ci sia qualche deposito Yang, che sarebbe opportuno eliminare. Quindi, ridurre drasticamente anche il sale e condimenti salati e aiutarsi con cibi che ci aiutano a sciogliere le stagnazioni (come daikon e funghi shitake).

L'assunzione giornaliera di shitake (anche in compresse, se risultasse più comodo, avendo cura di sceglierle accuratamente) potrebbe essere di aiuto nel rimuovere questi accumuli.

Per alleviare le sofferenze, ci si può aiutare con qualche clistere.

La malattia come messaggio

Importante è non trascurare anche l'aspetto psichico: qual è il messaggio che il nostro corpo mente ci sta lanciando?

L'intestino Crasso è correlato, in Medicina Tradizionale Cinese, all'energia Metallo, un'energia molto profonda, molto lenta, che facilmente può creare stagnazione. Ecco perché è importante creare movimento e trasformazione.

La funzione principale degli organi correlati al Metallo, come abbiamo visto, è quella di conservare ciò che ci serve ed eliminare ciò che non è utile. Chiediamoci: cosa non riusciamo a lasciare andare?

Le emorroidi (come le varici) sono un problema di forma, legate alla Terra, all'organo Milza-Pancreas. Questo è evidente anche se c'è sanguinamento: è la milza che mantiene i sangue nei vasi e una perdita di sangue manifesta il suo squilibrio.

Abbiamo consumato cibi troppo Yin, oppure troppo Yang, che hanno annodato anche la nostra mente, originando troppi pensieri, troppe preoccupazioni? Rinforziamo quest'organo con alimenti leggeri, con il sapore equilibrato del cereale e delle verdure dolci. Evitiamo lo zucchero e i cibi molto dolci (anche la frutta troppo zuccherina).

Oltre a Intestino e Milza, dovremmo riequilibrare anche il Fegato. Sarebbe bene evitare anche cibi tostati: oltre a caffè e cioccolata, anche l'orzo tostato potrebbe nuocere.

Silvia Petruzzelli
Silvia Petruzzelli

Ha frequentato percorso di Naturopatia presso l'Istituto di Medicina Psicosomatica e di Shiatsu presso l'Istituto di Ricerche e Terapie Energetiche di Milano. Ha studiato macrobiotica presso il Centro Macrobiotico di Renè Levy "Cuisine et Santè" (Centro di Studi sull'applicazione dell'Alimentazione Cerealicola a Saint Gaudens - Francia), La Sana Gola di Milano (Guida alla Terapia Alimentare), l'Istituto di Macrobiotica del Portogallo (Curarsi con il Cibo) approfondendo le temeatiche dell'alimentazione naturale con alcuni riferimenti del mondo scientifico, con il Dottor Franco Berrino, Giovanni Allegro a Cascina Rosa (Istituto Tumori di Milano), Francisco Varatojo direttore dell'Istituto Macrobiotico del Portogallo. Ha seguito corsi di Alta Cucina Naturale presso il Joia Academy, fondata dal maestro Pietro Leemann. Ha fondato il blog IlCibodellaSalute.com allo scopo di divulgare uno stile di vita sano, consapevole e sostenibile. Cuoca e Docente di Alimentare Naturale Macrobiotica e MTC presso l'Associazione Chicco di Riso, gestisce il B&B Il Melograno Nano, a Barga (LU). Conduce corsi teorici e pratici su tutto il territorio nazionale.